1Product Description The MPP-24 power pack is the foundation for any low voltage lighting control system.The MPP-24 supplies low voltage power to occupancy sensors and other control devices, switching line voltage in response to signals from control devices. The MPP-24 power pack is attached to existing junction boxes or mounted into fixture wiring trays.Low voltage wiring should use at least 22-gauge wire. High voltage connections should use at least 14-gauge. Always check local building codes. After initial wiring is completed, check wiring diagrams to verify the power pack is wired correctly. Improper wiring can cause damage to the power pack, lighting system, occupancy sensor and other control devices. 2Electrical Specifications . Voltage: 120/230/277VAC, 50/60Hz 3Load Requirements: . Ballast:20amp @120/277VAC . Incandescent:20amp @120VAC . Motor:1HP @120/240VAC . Output:150mA @24VDC (with relay connected) 4Low Voltage Input . Control ON :12-24VDC . Hold ON:12-24VDC . Hold OFF:12-24VDC . Manual ON(momentary switch required):12-24VDC 5Environmental Specifications . Operating Temperature: 32°to 131°F (0°to 55°C) 6Standards and Certifications . UL/CUL Listed |
Welcome to our website. If you have any requests or suggestions, please fill in and send the following form. Please allow us to provide you with the best service.