Product Description
This Multi-Technology Wall Switch Sensor
combine advanced passive infrared (PIR) and ultrasonic technologies into one
unit. The combined technologies help to avoid false triggering. Selectable
operating modes allow the sensor to turn a load on, and hold it on as long as
either or both technologies detect occupancy. After no movement is detected for
the selected time delay, the lights switch off. A "walk-through" mode
can turn lights off after only 3 minutes, if no activity is detected after 30
seconds following an occupancy detection. This sensor also contains a light
level sensor. If adequate daylight is present, the sensor, holds the load OFF
until light levels drop, even if the area is occupied.
Electrical Specifications
. Voltage: 120/277VAC, 50/60Hz, Single Pole
Load Requirements:
. Incandescent:800W-120VAC,50/60Hz
. Fluorescent:800VA-120VAC,1600VA-277VAC,50/60Hz
. Motor: 1/4HP-120VAC,50/60Hz
. Adjustable Light Level:100 Lux --daylight(trimpot)
. Adjustable Time Delay:15Sec to 30Mins
. Walk-Through Mode:3 minutes if no activity after 30 sec.
. Test Mode:15 sec. at initial power up or DIP switch reset
. PIR Adjustment:High or Low (DIP switch)
. Ultrasonic Adjustment:Minimum to Maximum (trimpot)
Environmental Specifications
Welcome to our website. If you have any requests or suggestions, please fill in and send the following form. Please allow us to provide you with the best service.